The SmallRig Ballhead Clamp Double Ball Adapter review is for creators who need to position a small monitor, light, or other accessory on a camera rig or compatible support.
Its combination of a padded clamp, articulated ball head, and 1/4-inch screw offers flexible placement, with fit and load limits worth checking against your setup.
SmallRig Ballhead Adapter Review Summary
The quick verdict

1,000+ ratings
Read Amazon ReviewsSmallRig Ballhead Clamp Double Ball Adapter 2164-CF
A compact mounting option for camera creators who want to clamp a monitor, light, or other small accessory to a compatible rod or tube.
- Model 2164-CF uses a bottom clamp with jaws that open up to 40 mm.
- A double ball head provides 360-degree articulation for adjusting the mounted accessory's angle.
- The top connection has a 1/4-inch screw for compatible monitors, lights, cameras, and other accessories.
- The clamp area has a dense rubber pad intended to help prevent scratches.
Pros
- Combines a clamp and adjustable ball-head mount in one compact assembly.
- A stated 40 mm jaw opening gives buyers a concrete upper fit limit to check.
Consider before buying
- A 40 mm maximum opening will not fit supports wider than that; measure the intended rod or tube first.
- The load guidance is inconsistent, listing up to 1 kg in one place and a 1.5 kg maximum recommendation elsewhere.
Read the full review summary
The 2164-CF combines a clamp that opens to 40 mm with a double ball head and a 1/4-inch screw for attaching compatible accessories.
The clamp can grip a rod or tube, while the ball head lets you change the accessory's angle; a single locking knob is intended to secure the position.
Its mostly aluminum-alloy construction and rubber padding suit a compact rig where a straightforward adjustable mount is useful.
It may fit photographers and video makers who want to add a monitor or light without dedicating a larger arm to the job, and the removable arm can make the piece easier to adapt to a mounting arrangement.
The supplied details contain inconsistent load figures: they give a maximum load of up to 1 kg in one place and a maximum weight recommendation of 1.5 kg elsewhere.
Treat the lower figure as a conservative ceiling and check the accessory's weight, clamp fit, and mounting interface before buying.
The buying factors
SmallRig Ballhead Adapter Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Clamp fit range
The jaws open to 40 mm, making the supported diameter a useful and clearly stated fit criterion.
Angle adjustment
The double ball head is described as offering 360-degree articulation for positioning.
Accessory connection
A 1/4-inch screw supports common camera accessories, though buyers still need to confirm their own interface.
Build and contact protection
Mostly aluminum-alloy construction and a dense rubber pad are practical choices for a clamp-style mount.
Load guidance clarity
The supplied details give both 1 kg and 1.5 kg maximum figures, so a conservative reading is prudent.
Rig versatility
The clamp and removable arm are described for use with rods, tubes, shoes, and several accessory types.
Key Features and Specifications of SmallRig Ballhead Adapter
- Model 2164-CF uses a bottom clamp with jaws that open up to 40 mm.
- A double ball head provides 360-degree articulation for adjusting the mounted accessory's angle.
- The top connection has a 1/4-inch screw for compatible monitors, lights, cameras, and other accessories.
- The clamp area has a dense rubber pad intended to help prevent scratches.
- The construction is described as nearly all metal, using aluminum alloy; the arm can be removed.
- The product is listed at 163 g, with a folded size of 68.5 × 43 × 10 mm.
Pros and Cons of SmallRig Ballhead Adapter
Pros
- Combines a clamp and adjustable ball-head mount in one compact assembly.
- A stated 40 mm jaw opening gives buyers a concrete upper fit limit to check.
- The rubber-padded clamp area is designed to protect contacted surfaces from scratches.
- The removable arm offers another way to adapt the assembly to a rig.
Consider before buying
- A 40 mm maximum opening will not fit supports wider than that; measure the intended rod or tube first.
- The load guidance is inconsistent, listing up to 1 kg in one place and a 1.5 kg maximum recommendation elsewhere.
- The 1/4-inch screw and clamp arrangement require buyers to confirm that both ends suit their specific equipment and support.
Who Should Buy SmallRig Ballhead Adapter?
Good fit
Consider the 2164-CF if you want one compact mount to clamp onto a compatible rod or tube and angle a small monitor, light, or camera accessory.
The ball-head articulation is useful when the accessory needs to face a particular direction, and the 1/4-inch screw offers a familiar connection for compatible gear.
Before choosing it, measure the support where the clamp will sit and check the accessory's mounting point.
Because the load figures conflict, keep the total comfortably within the lower listed limit of 1 kg, and make sure the clamp is fully seated and tightened for the intended setup.
Who should skip it
Skip this design if your support is wider than 40 mm, lacks a suitable clamping surface, or your accessory needs a connection other than the 1/4-inch screw.
Choose a different mounting approach if your equipment's weight makes the conflicting load guidance difficult to resolve conservatively.
How the SmallRig Ballhead Adapter Fits a Camera Rig
Clamp range and mounting surface
The 40 mm jaw opening is the key sizing check. Measure the rod, tube, or other support at the exact point where the clamp will attach, and consider whether its shape gives the jaws stable contact.
The rubber pad is intended to protect the clamp area from scratches, but proper fit still depends on the support's dimensions and surface.
Positioning an accessory
The double ball head provides 360-degree articulation, so the mounted accessory can be angled to suit a shooting position. A single locking knob is meant to make adjustment and locking straightforward.
As with any compact articulated mount, the usefulness of that movement depends on the accessory's weight and how far it projects from the clamp.
Checking the load and interface
The 1/4-inch screw is the stated top connection, and the product is described for monitors, LED lights, and other small accessories.
The supplied load information does not agree: it gives up to 1 kg in the highlights and 1.5 kg as a maximum recommendation.
Use 1 kg as the cautious limit, include the accessory in that calculation, and confirm that its mounting point mates directly.
Compact construction and practical setup
At 163 g with a listed folded size of 68.5 × 43 × 10 mm, the adapter is intended to take up little room in a camera kit.
The aluminum-alloy construction and removable arm offer practical flexibility, while the clamp's padded contact area is designed to reduce scratching. For a secure setup, check the jaw fit and locking knob after aiming the accessory.
Alternatives to SmallRig Ballhead Adapter
Camera Mounts & Clamps alternative

8,000+ ratings
Read Amazon ReviewsSmallRig Double Ball Head Super Clamp Mount 1138
Choose the 2164-CF if its 40 mm clamp and removable arm suit your rig.
Consider the 1138 if the included action-camera adapter or its listed 1.5 kg support better matches your setup; verify the relevant fit and load details for either mount.
- The 1138 includes a super clamp, double ball head, 1/4-inch-20 screw, and action-camera adapter; its description gives a maximum support of 1.5 kg and mentions rod, tube, table, and frame mounting.
- The 2164-CF pairs a 40 mm clamp with a double ball head and 1/4-inch screw, and its load guidance is inconsistent.
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 9.8-Inch Magic Arm Clamp Kit 2732
The 2164-CF is the more compact fit when its shorter clamp-and-ball-head arrangement is sufficient. The 2732 is a better match when you need a longer 25 cm arm, a wider clamp range, or the additional 3/8-inch threaded connection.
- The 2732 pairs a 25 cm articulating arm with a super clamp, 1/4-inch and 3/8-inch clamp threads, and 1/4-inch screws at both ends of the arm.
- Its clamp is described as opening from 15 to 54 mm.
- The 2164-CF uses a compact double ball head with a 1/4-inch screw and a clamp opening up to 40 mm.
Is SmallRig Ballhead Adapter Worth It?
The SmallRig Ballhead Clamp Double Ball Adapter 2164-CF is worth considering for a compact rig that needs a clamp-mounted, angle-adjustable accessory.
Its 40 mm jaw opening, 1/4-inch screw, padded contact area, and removable arm cover useful mounting needs without adding a long articulated arm.
Check the clamp dimensions and accessory interface before buying, and treat 1 kg as the conservative load ceiling because the supplied figures conflict.
If those limits fit your equipment, this is a practical option for positioning a small camera accessory.
Your review at a glance

1,000+ ratings
Read Amazon ReviewsSmallRig Ballhead Clamp Double Ball Adapter 2164-CF
A compact mounting option for camera creators who want to clamp a monitor, light, or other small accessory to a compatible rod or tube.
- Model 2164-CF uses a bottom clamp with jaws that open up to 40 mm.
- A double ball head provides 360-degree articulation for adjusting the mounted accessory's angle.
- The top connection has a 1/4-inch screw for compatible monitors, lights, cameras, and other accessories.
- The clamp area has a dense rubber pad intended to help prevent scratches.