The SmallRig 1138 camera clamp review is for creators who need to mount a compact camera or accessory to a nearby rod, tube, table, or frame.
Its clamp, dual ball-head adjustment, and 1/4-20 screw make it a versatile small-rig option, with a stated load limit to keep in mind.
SmallRig 1138 Clamp Review Summary
The quick verdict

8,000+ ratings
Read Amazon ReviewsSmallRig 1138 Super Camera Clamp
A flexible clamp and ball-head mount for creators who need to position compact cameras or accessories on rods, tubes, desks, or frames.
- Clamp mount with dual ball-head adjustment for changing the position of attached gear.
- A 1/4-20 screw for mounting cameras, monitors, lights, microphones, and other compatible accessories.
- Clamp attachment is intended for rods, tubes, tables, frames, and tripods; installation does not require drilling.
- An action-camera mount adapter is included alongside the super clamp.
Pros
- Combines support clamping and angle adjustment in one compact mount.
- The 1/4-20 connection and included action-camera adapter accommodate several kinds of small gear.
Consider before buying
- The stated 1.5 kg maximum capacity rules it out for heavier equipment.
- SmallRig recommends a safety rope for dynamic use, adding a step to moving or vehicle-mounted setups.
Read the full review summary
The 1138 combines a gripping clamp with a dual ball-head adapter, so it can attach to a support and aim a camera or accessory without drilling.
The included action-camera adapter broadens the mounting options, while the aluminum and stainless-steel construction suits a reusable rig component.
It is best suited to lightweight content-creation setups where a compact camera, monitor, microphone, or light needs a flexible mounting point.
Its stated maximum capacity is 1.5 kg, and SmallRig advises using a safety rope in dynamic situations; buyers should match the mounted gear and shooting environment to those limits.
The buying factors
SmallRig 1138 Clamp Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting versatility
The clamp can attach to several support types, and the 1/4-20 screw and action-camera adapter support varied gear.
Angle adjustment
The dual ball-head arrangement is designed to position mounted gear at different angles.
Load capacity
The stated maximum of 1.5 kg covers a range of compact accessories, but it limits suitability for heavier rigs.
Build materials
Aluminum and stainless steel make for a durable-feeling combination in a small mounting accessory.
Portability
At 0.2 kg and about 3.74 by 3.35 by 0.98 inches, it is compact enough to add to a mobile kit.
Dynamic-use readiness
The maker specifically advises attaching a safety rope for dynamic scenarios, so moving setups call for extra care.
Key Features and Specifications of SmallRig 1138 Clamp
- Clamp mount with dual ball-head adjustment for changing the position of attached gear.
- A 1/4-20 screw for mounting cameras, monitors, lights, microphones, and other compatible accessories.
- Clamp attachment is intended for rods, tubes, tables, frames, and tripods; installation does not require drilling.
- An action-camera mount adapter is included alongside the super clamp.
- Aluminum and stainless-steel construction, with a stated maximum load capacity of 1.5 kg.
- Compact body measuring about 3.74 by 3.35 by 0.98 inches and weighing 0.2 kg.
Pros and Cons of SmallRig 1138 Clamp
Pros
- Combines support clamping and angle adjustment in one compact mount.
- The 1/4-20 connection and included action-camera adapter accommodate several kinds of small gear.
- Can attach to common support surfaces such as rods, tubes, tables, or frames without drilling.
- Aluminum and stainless steel are appropriate materials for a reusable rig accessory.
Consider before buying
- The stated 1.5 kg maximum capacity rules it out for heavier equipment.
- SmallRig recommends a safety rope for dynamic use, adding a step to moving or vehicle-mounted setups.
- Before buying, check that the clamp can fit the diameter or thickness of the exact support you plan to use.
Who Should Buy SmallRig 1138 Clamp?
Good fit
Consider the SmallRig 1138 Clamp if you want to put a compact camera or accessory on a support that lacks a dedicated mounting point.
The combination of clamp attachment and dual ball-head positioning can be useful at a desk, on a rod, or around a small production setup, while the 1/4-20 screw serves as a familiar connection for compatible gear.
It may also make sense for action-camera users who want a clamp-based mounting option, since an action-camera adapter is included.
Keep the full mounted setup within the stated 1.5 kg maximum, confirm the clamp will fit the support, and use the safety rope in dynamic scenarios as SmallRig advises.
For a stationary camera or light placement, the main appeal is having a clamp and adjustable head together rather than sourcing separate pieces.
Think through how often you will reposition the gear and whether the available support surface gives the clamp a secure, suitable place to attach.
Who should skip it
Skip it if your setup needs to carry equipment above the stated 1.5 kg capacity or if you need a mount specifically designed for a larger, heavier rig.
For moving applications, only choose it if you can use the recommended safety rope and secure the assembly appropriately.
How the SmallRig 1138 Clamp Fits a Compact Rig
A clamp that creates a mounting point
The 1138 is useful when a rod, tube, table, or frame is available but lacks a direct place to attach a camera accessory.
Clamping avoids drilling and can make temporary placement easier, though the support's dimensions and shape still matter: check that the jaw range suits the surface you intend to use.
Ball-head positioning adds flexibility
The dual ball-head design gives the mounted accessory room to angle and reposition.
That can help when framing a small camera or aiming a light or monitor, but every connection in the setup should be considered together; the mount's stated capacity applies to the supported load, so stay within it.
Plan around weight and movement
A 1.5 kg maximum makes this a compact-accessory mount rather than a general solution for substantial camera rigs.
SmallRig's safety-rope note for dynamic situations is especially relevant for vehicle, bicycle, or other moving setups, where buyers should plan a secondary restraint rather than relying on the clamp alone.
Alternatives to SmallRig 1138 Clamp
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 2732 9.8-Inch Magic Arm Clamp Kit
Choose the 1138 when a compact clamp-and-head unit with an action-camera adapter suits your placement. The 2732 is a better fit when you want a longer arm and the option of 3/8-inch threaded connections.
- The 2732 pairs a super clamp with a 9.8-inch articulating arm, includes 1/4-inch and 3/8-inch clamp threads, and has a 15–54 mm jaw range.
- The 1138 combines a clamp and dual ball-head adapter in a compact mount, with a stated maximum load of 1.5 kg.
Camera Mounts & Clamps alternative

800+ ratings
Read Amazon ReviewsSmallRig 4103 Double Clamp Mount
Choose the 1138 for a lighter, simpler clamp mount with an included action-camera adapter. Consider the 4103 if your setup needs two clamping points, a wider stated rod range, or its higher listed load capacity.
- The 4103 has two clamps, adjusts through 360 degrees, fits rods from 14 to 60 mm, and lists a maximum load capacity of 3.5 kg.
- The 1138 uses one clamp to attach gear to a support and is rated for up to 1.5 kg.
Is SmallRig 1138 Clamp Worth It?
The SmallRig 1138 Super Camera Clamp is worth considering for creators who need a compact way to attach and angle lightweight gear on a rod, tube, table, or frame.
Its combination of a clamp, dual ball-head adjustment, standard 1/4-20 screw, and action-camera adapter covers several common small-rig tasks.
Its best fit depends on respecting the 1.5 kg maximum, checking clamp fit against the support, and using a safety rope for dynamic scenarios. If those conditions match your setup, the 1138 offers a practical all-in-one mounting option.
Your review at a glance

8,000+ ratings
Read Amazon ReviewsSmallRig 1138 Super Camera Clamp
A flexible clamp and ball-head mount for creators who need to position compact cameras or accessories on rods, tubes, desks, or frames.
- Clamp mount with dual ball-head adjustment for changing the position of attached gear.
- A 1/4-20 screw for mounting cameras, monitors, lights, microphones, and other compatible accessories.
- Clamp attachment is intended for rods, tubes, tables, frames, and tripods; installation does not require drilling.
- An action-camera mount adapter is included alongside the super clamp.